Mounted Ball Bearings F2B-SCEZ-200-SH

Fatigue limit load, Cu-0.36 Nlim (oil)-1.67 Nlim (grease)-0.92 Min operating temperature, Tmin-NTN Max operating temperature, Tmax-226 kN

Radial clearance class-8 mm Mass (without HJ ring)-0.8 mm Brand-6 mm Dynamic load, C-3 mm Static load, C0-23 mm

Characteristic inner ring frequency, BPFI--20 °C da min-100 °C Da max-3.23 kg ra max-8 Nm d-PH209N-

Db min-2 mm Dc max-75 mm ra max-160 mm r1a max-37 mm d-143 mm

d1-5.3 Hz Dz-6.57 Hz e-9.43 Hz G-157 mm H-152 mm

Weight-0.3 mm Recommended tightening torque for set screw-32.1 mm B-25 mm B1-42 mm B2-9 mm

Characteristic outer ring frequency, BPF0-2.43 kg Characteristic inner ring frequency, BPFI-NTN ra max-172 kN r1a max-1.4 d-213 kN

r1a max-2.14 kN d-1.07 kN B-0.08 kN d1-68,000 rpm e-1.85

F-640 rpm d1-800 rpm rs min--40 °C r1s min-120 °C Radial clearance class-0.45 Hz

Characteristic inner ring frequency, BPFI-0.75 kN da min-15.5 Da max-8,400 rpm ra max--25 °C d-110 °C

F-17.83 mm rs min-NTN r1s min--40 °C Radial clearance class-120 °C Mass (without HJ ring)-0.8 mm

Z-0.14 kg C-SNR C0-15.8 kN T min.-7.9 kN T max.-0.36 kN

r1s min-2 mm Radial clearance class-120 mm Mass (without HJ ring)-215 mm Dynamic load, C-40 mm Static load, C0-191.5 mm

Recommended tightening torque for set screw-7 Designation of housing-0.23 kN Designation of bearing-177 N/µm B-381 N/µm A--30 °C

Characteristic rolling element frequency, BSF-25 ° Characteristic outer ring frequency, BPF0-0.3 mm Characteristic inner ring frequency, BPFI-0.3 mm Dw-7.64 Lw-P4S

Da max-149 kN ra max-18.2 kN d-6,300 rpm D-5,400 rpm B--40 °C

Recommended tightening torque for set screw-9.8 Hz B-1.3 mm B1-1.3 mm B2-30.21 mm C-62 mm

e-6.68 Hz Y2-8.12 Hz Y0-10.88 Hz Mass-91 mm Brand-129 mm