Plain Bearings LD-50X6-TUFR

Fatigue limit load, Cu-665 kN Nlim (oil)-795 kN Nlim (grease)-76.5 kN Min operating temperature, Tmin-2,400 rpm Max operating temperature, Tmax-2,100 rpm

Min operating temperature, Tmin-180 mm Max operating temperature, Tmax-300 mm Characteristic cage frequency, FTF-96 mm Characteristic rolling element frequency, BSF-206 mm Characteristic outer ring frequency, BPF0-266.8 mm

Dynamic load, C-C3 Static load, C0-12.5 kg Fatigue limit load, Cu-NTN Nref-450 kN Nlim-510 kN

Characteristic outer ring frequency, BPF0-2.5 mm Characteristic inner ring frequency, BPFI-2 mm da min-0.44 Da max-1.38 ra max-0.76

T min.-0.8 mm T max.-34.92 mm Weight-24.61 mm B-53 mm B1-0.29

ra max-27 mm d1-35 mm e-11 mm Y2-85 mm Y0-119 mm

Nlim--30 °C Min operating temperature, Tmin-120 °C Max operating temperature, Tmax-0.44 Hz Characteristic cage frequency, FTF-7.4 Hz Characteristic rolling element frequency, BSF-8.79 Hz

Static load, C0-76.2 mm Fatigue limit load, Cu-98 mm Nlim (oil)-22 mm Nlim (grease)-M10 Min operating temperature, Tmin-15 mm

r1a max-T2GB160 d-915 kN D-1 B-1,200 kN C-111 kN

e-2.96 kg Y1-SNR Y2-361 kN Y0-479 kN Radial clearance class-35.6 kN

A1-35.5 kN B-1.4 d-34 kN Dz-4.15 kN G-11,000 rpm

Designation of bearing-55.56 mm A-100 mm A1-3/8-24UNF B-9 mm d-1.1

Contact angle α-NTN rs min-85 kN r1s min-102 kN f0-12,100 rpm Precision class-7,600 rpm

Characteristic rolling element frequency, BSF-73 mm Characteristic outer ring frequency, BPF0-0.6 mm Characteristic inner ring frequency, BPFI-Non/No da min-2.2 mm Da max-P0

Recommended tightening torque for set screw-2.1 mm b-3 B2-14.3 mm C1-7 mm d1-H3040

SW-18.8 mm C0-3.97 mm T min.-15.2 kN T max.--20 °C Weight-100 °C

C1-1.5 mm d-1.5 mm d1-0.3 D-2.01 G-1.11

m-82 mm r-1.5 mm S-51.9 mm SW-78.1 mm C0-1.5 mm

Designation of bearing-Non/No A-IR35X40X20 A1-0.05 kg B-21.1 kN B1-40 kN