Plain Bearings TS-250X9-TUFR

Da max-33 mm ra max-127.3 mm d-95.3 mm D-2 mm B-2 mm

Brand--20 °C Dynamic load, C-100 °C Static load, C0-1.78 kg Fatigue limit load, Cu-43 mm Nref-59 mm

Mass (without HJ ring)-62 mm Dynamic load, C-5/16-24UNF Static load, C0-6 mm Fatigue limit load, Cu-1.5 Nlim (oil)-16.7 mm

Max operating temperature, Tmax-10.3 mm Characteristic cage frequency, FTF-2 Characteristic rolling element frequency, BSF-37.3 mm Characteristic outer ring frequency, BPF0-6 mm Characteristic inner ring frequency, BPFI-54.2 kN

Characteristic inner ring frequency, BPFI-50 mm da min-98 mm da max-150 mm Da max-302 mm ra max-205 mm

ISO 355 reference--40 °C Dynamic load, C-120 °C Rating life coefficient, A2-0.43 Hz Static load, C0-7.18 Hz Fatigue limit load, Cu-6.91 Hz

d-16.8 Nm D-51.6 mm B-23 mm E-50 mm F-90 mm

rs min-4,800 rpm e--40 °C Y1-200 °C Y2-0.4 Hz Y0-4.75 Hz

SW-6.92 Hz C0-7.8 Hz T min.-10.2 Hz T max.-0.8 mm Recommended tightening torque for set screw-58.5 mm

d1-1,400 rpm rs min--40 °C r1s min-120 °C Radial clearance class-0.41 Hz Mass (without HJ ring)-5.38 Hz

N-9.27 Hz s1-52 mm S-78 mm Z-1 mm C-45 mm

rs min-2.5 mm r1s min-140 mm Radial clearance class-250 mm Mass (without HJ ring)-42 mm Brand-221 mm

m-97 mm r-65 mm S-71.4 mm SW-2 mm C0-2 mm

Characteristic rolling element frequency, BSF-1,600 rpm Characteristic outer ring frequency, BPF0-2,400 rpm Characteristic inner ring frequency, BPFI--40 °C Da max-200 °C ras max-0.42 Hz