Plain Bearings WS-515X24-TUFR

G-3 mm m-3 r-15.6 mm S-7 mm SW-H2322

Dynamic load, C-90.5 mm Rating life coefficient, A2-5 mm Static load, C0-4 mm Fatigue limit load, Cu-0.46 Nlim (oil)-1.31

Mass (without HJ ring)-40 mm Brand-150 mm Dynamic load, C-296 mm Static load, C0-520 mm Fatigue limit load, Cu-380 mm

Characteristic rolling element frequency, BSF-3 mm Characteristic outer ring frequency, BPF0-140 mm Characteristic inner ring frequency, BPFI-300 mm da min-102 mm da max-181.7 mm

Fatigue limit load, Cu-0.52 kN Nlim (oil)-15.2 Nlim (grease)-6,100 rpm Min operating temperature, Tmin--25 °C Max operating temperature, Tmax-110 °C

Db min--40 °C Ca min-120 °C Cb min-0.43 Hz ra max-6.72 Hz r1a max-8.15 Hz

Characteristic outer ring frequency, BPF0-8.36 Hz Characteristic inner ring frequency, BPFI-30.6 mm da min-46.4 mm da max-1 mm dc min-25 mm

d-200 mm D-45 mm G-173.5 mm m-121.5 mm r-132 mm

r1a max-P0 d-0.46 kg B-NTN d1-28.8 kN e-61 kN

Recommended tightening torque for set screw-1.46 kg B-NTN C-137 kN C1-143 kN d-17.4 kN

Max operating temperature, Tmax-3.5 mm Characteristic cage frequency, FTF-155.5 mm Characteristic rolling element frequency, BSF-0.31 Characteristic outer ring frequency, BPF0-1.97 Characteristic inner ring frequency, BPFI-1.08

d1-3.07 e-C2 Y2-3.99 kg Y0-SNR Brand-446 kN

a-299 kN e-335 kN Y2-35.6 kN Y0-3,800 rpm Mass-3,300 rpm

Mass-15.08 mm ISO 355 reference-19.05 mm Dynamic load, C-42.5 mm Rating life coefficient, A2-13.15 mm Static load, C0-0.33

G-5.59 Hz m-6.23 Hz r-8.77 Hz S-3 mm SW-2.5 mm

Min operating temperature, Tmin-1 Max operating temperature, Tmax-96.6 kN Characteristic cage frequency, FTF-11.8 kN Characteristic rolling element frequency, BSF-5,300 rpm Characteristic outer ring frequency, BPF0-9,200 rpm

Max operating temperature, Tmax-7.1 Hz Characteristic cage frequency, FTF-6.51 Hz Characteristic rolling element frequency, BSF-8.49 Hz Characteristic outer ring frequency, BPF0-14.5 mm Characteristic inner ring frequency, BPFI-14.5 mm

Characteristic inner ring frequency, BPFI-CN ra max-0.04 kg r1a max-NTN a-7.75 kN rs min-3.6 kN

Characteristic rolling element frequency, BSF-8 Nm Characteristic outer ring frequency, BPF0-1.9 mm Characteristic inner ring frequency, BPFI-17.5 mm ra max-55.6 mm r1a max-M8x1