Mounted Tapered Roller Bearings NSTU-C-104

r1a max-100 °C d-0.7 kg D-8 Nm B-49.2 mm C-22 mm

ra max-SNR rNa max-1,140 kN d-1,570 kN D-120 kN B-1,900 rpm

Characteristic outer ring frequency, BPF0-32 mm Characteristic inner ring frequency, BPFI-9.9 mm da min-50 mm Da max-110 mm ra max-M12x1,25

Recommended tightening torque for set screw-1,010 kN B-91.9 kN B1-2,200 rpm B2-1,800 rpm C--40 °C

A1-3.5 mm A2-0.8 mm A4-34.3 mm B1-2.54 mm d-2.54 mm

Characteristic outer ring frequency, BPF0-1.9 Characteristic inner ring frequency, BPFI-105 kN da min-12.8 kN dc min-6,800 rpm Da max-5,100 rpm

ra max-294.5 mm rs min-1 mm e-2 mm Y1-252 mm Y2-266.7 mm

Dynamic load, C-119 mm Rating life coefficient, A2-167 mm Static load, C0-2.5 mm Fatigue limit load, Cu-85 mm Nlim (oil)-180 mm

Characteristic inner ring frequency, BPFI-0.8 kg ra max-NTN r1a max--20 °C D-120 °C C-135 mm

r1s min-19.8 mm Radial clearance class-1.5 mm Mass (without HJ ring)-1.5 mm Brand-0.41 Dynamic load, C-1.48

P 55°-92 mm P 90°-113 mm P 120°-115.5 mm P 150°-0.6 mm P 180°-1 mm

Max operating temperature, Tmax-28 mm Characteristic cage frequency, FTF-9 mm Characteristic rolling element frequency, BSF-14 mm Characteristic outer ring frequency, BPF0-4 mm Characteristic inner ring frequency, BPFI-20 mm

d1-9.8 Hz rs min-1.3 mm r1s min-1.3 mm e-30.21 mm Y2-62 mm

Mass-11,5mm Brand-19.05 mm Dynamic load, C-15.9 mm Static load, C0-19.5 kN Fatigue limit load, Cu-11.2 kN

da max-16.01 mm Da max-0.3 ra max-1.98 d-1.09 D-0.55 kg

D-10.21 Hz B-12.79 Hz d1-3.5 mm D1-102 mm D2-3.5 mm

Number of lubrication holes-425 kN b-3,500 rpm k-2,900 rpm e--40 °C Y1-120 °C

r0 max-T2BC055 D4 max-NTN f-44.5 kN Snap ring reference-1 Radial clearance class-73.5 kN

E-73 mm F-0.6 mm d1-Non/No rs min-2.2 mm r1s min-P0