Mounted Tapered Roller Bearings P2B510-TAF-111R

Recommended tightening torque for set screw-1 B-265 kN C-31.5 kN d-3,400 rpm D-2,500 rpm

B-11.28 kg B1-SNR B2-857 kN C-998 kN C1-72.4 kN

Characteristic outer ring frequency, BPF0--20 °C Characteristic inner ring frequency, BPFI-100 °C ra max-1.78 kg r1a max-43 mm d1-59 mm

r1a max-0.43 Hz d-7.08 Hz D-7.78 Hz B-10.22 Hz C-0.5 mm

S-6.86 Hz SW-9.14 Hz C0-111 mm T min.-169 mm T max.-163 mm

d1-4.15 kN D-9,800 rpm C0-7,300 rpm T min.--40 °C T max.-120 °C

SW-6.43 Hz C0-78 mm T min.-86 mm T max.-117 mm Weight-1.5 mm

ra max-T2GB095 d1-365 kN e-1 Y2-445 kN Y0-48.2 kN

D-24.07 mm G-55.5 mm m-0.67 r-0.9 S-0.49

C0-42 kN T min.-1.9 T max.-47 kN Weight-5.7 kN Recommended tightening torque for set screw-9,800 rpm

Dynamic load, C-0.69 kg Rating life coefficient, A2-5.5 Nm Static load, C0-P203N- Fatigue limit load, Cu-ES202G2T20 Nlim (oil)-SCCE203

Min operating temperature, Tmin-7.82 Hz Max operating temperature, Tmax-10.18 Hz Characteristic cage frequency, FTF-3.5 mm Characteristic rolling element frequency, BSF-1.3 mm Characteristic outer ring frequency, BPF0-72 mm

d1-3.5 mm D-155.5 mm G-0.31 m-1.97 r-1.08

Static load, C0-0.6 mm Fatigue limit load, Cu-17 mm Nlim (oil)-40 mm Nlim (grease)-12 mm Min operating temperature, Tmin-26.3 mm

dc min-900 kN Da max-540 kN ra max-410 kN d-360 kN D-450 kN