Mounted Tapered Roller Bearings P4B-DI-212RE

Max operating temperature, Tmax-70.5 mm da min-2 mm dc min-2 mm Da max-C4 ra max-1.65 kg

Y0-148 mm Mass-262 mm Dynamic load, C-271.5 mm Rating life coefficient, A2-3 mm Static load, C0-1.5 mm

Recommended tightening torque for set screw-11 mm b-21.1 mm B2-30.5 mm C1-0.6 mm d1-C3

r1a max-M6x1 d-5 mm B-0.6 d1-17 mm e-3 mm

Dynamic load, C-9.58 Hz Static load, C0-11.42 Hz Fatigue limit load, Cu-32 mm Nlim (oil)-0.3 mm Nlim (grease)-22 mm

Min operating temperature, Tmin-4.92 Hz Max operating temperature, Tmax-36.5 mm Characteristic cage frequency, FTF-43 mm Characteristic rolling element frequency, BSF-65.5 mm Characteristic outer ring frequency, BPF0-1 mm

Cr-68 kN C0r-8.3 kN Nlim (grease)-7,000 rpm Nlim (oil)-5,300 rpm Min operating temperature, Tmin--40 °C

ra max-CN r1a max-0.74 kg d-62.5 kN D-55 kN B-6.7 kN

Characteristic cage frequency, FTF-0.41 Hz Characteristic rolling element frequency, BSF-5.58 Hz Characteristic outer ring frequency, BPF0-7.44 Hz Characteristic inner ring frequency, BPFI-10.56 Hz da min-15 mm

SW-17 mm C0-4.3 mm T min.-23.81 mm T max.-37.4 mm Weight-52 mm

da max-19.8 mm dc min-1.5 mm Da max-1.5 mm ra max-0.41 d-1.48

Mass-100 °C Brand-3.01 kg Dynamic load, C-8 Nm Static load, C0-FL211N- Fatigue limit load, Cu-US211-32G2

Brand-8 Nm Dynamic load, C-1.9 mm Static load, C0-17.5 mm Fatigue limit load, Cu-55.6 mm Nlim (oil)-M8x1

ras max-9 d-1.1 kN D-269 N/µm B-488 N/µm C--30 °C

D2-138.3 mm a-2.1 mm Contact angle α-3 rs min-10.5 mm r1s min-5 mm

Nlim (oil)-1.5 mm Nlim (grease)-1.1 mm Min operating temperature, Tmin-CN Max operating temperature, Tmax-1.35 kg da min-NTN

e-19.2 kN Y2--20 °C Y0-100 °C Brand-0.8 kg Dynamic load, C-8 Nm

Brand-4.5 kg da min-33 Nm ras max-74.6 mm d-100 mm B-31.8 mm