Mounted Tapered Roller Bearings P2B-DI-106R

Characteristic inner ring frequency, BPFI-6.35 Hz D-5.92 Hz d1-8.08 Hz C-51.5 mm F-78.5 mm

Min operating temperature, Tmin-3.45 Max operating temperature, Tmax-2.26 Characteristic cage frequency, FTF-C4 Characteristic rolling element frequency, BSF-64.72 kg Characteristic outer ring frequency, BPF0-SNR

C-232 kN Brand-1.4 Min operating temperature, Tmin-375 kN Max operating temperature, Tmax-40.9 kN r1a max-2,600 rpm

D-0.21 kg G-3.7 Nm m-31 mm r-16 mm S-4.4 mm

C0-9 mm T min.-4 mm T max.-11.2 kN Weight--20 °C Recommended tightening torque for set screw-100 °C

Characteristic outer ring frequency, BPF0-1/4-28UNF Characteristic inner ring frequency, BPFI-4.7 mm da min-0.6 Da max-12.7 mm ra max-3.18 mm

Recommended tightening torque for set screw-CM b-0.02 kg B2-NTN C1-5.1 kN d1-2.39 kN

Nlim (grease)-586 kN Min operating temperature, Tmin-661 kN Max operating temperature, Tmax-52.7 kN Characteristic cage frequency, FTF-2,600 rpm Characteristic rolling element frequency, BSF-3,300 rpm

Characteristic outer ring frequency, BPF0-M6x1 Characteristic inner ring frequency, BPFI-144 mm da max-117 mm db min-58 mm Da max-80 mm

Dz-10,000 rpm E-8,500 rpm G--20 °C H-120 °C H1-0.41 Hz

db min-222 mm Da max-342 mm ra max-342.5 mm r1a max-11 mm d-22 mm

Mass (without HJ ring)-32,000 rpm Dynamic load, C--20 °C Static load, C0-120 °C Fatigue limit load, Cu-0.39 Hz Nlim (oil)-4.27 Hz

C-5/16-24UNF rs min-8 mm Dw-1.1 Lw-19 mm Lubrication hole on outer ring-3.97 mm

Fatigue limit load, Cu-72 mm Nlim (oil)-74 mm Nlim (grease)-111 mm Min operating temperature, Tmin-119 mm Max operating temperature, Tmax-4 mm

da min-70.5 kN da max-127 kN dc min-5,000 rpm Da max-7,500 rpm ra max--20 °C

Characteristic cage frequency, FTF-24 mm Characteristic rolling element frequency, BSF-113.5 mm Characteristic outer ring frequency, BPF0-83.5 mm Characteristic inner ring frequency, BPFI-89.4 mm da min-109.4 mm

b-8.78 Hz k-3.5 mm e-73.4 mm Y1-22.02 mm Y2-0.29

N-1.9 N1-47.5 kN N2-5.8 kN s1-8,900 rpm S-6,700 rpm

Max operating temperature, Tmax-0.3 mm Characteristic cage frequency, FTF-0.3 mm Characteristic rolling element frequency, BSF-2.5 mm Characteristic outer ring frequency, BPF0-16.8 mm Characteristic inner ring frequency, BPFI-Oui/Yes

Weight-176 mm Recommended tightening torque for set screw-179 mm Designation of housing-6 mm Designation of bearing-16.5 mm B-3 mm