Mounted Tapered Roller Bearings P2B-K-300RE

Recommended tightening torque for set screw-0.43 Hz B-6.92 Hz B1-7.8 Hz B2-10.2 Hz C-3.5 mm

Ca max-11.5 Nm rs min-42.9 mm rNs min-20 mm D3 max-5.8 mm b min-35 mm

Fatigue limit load, Cu-13.7 kN Nref-5,800 rpm Nlim-7,400 rpm Min operating temperature, Tmin--40 °C Max operating temperature, Tmax-200 °C

D1-292 mm rs min-300 mm Number of lubrication holes-384 mm Associated sleeve reference-3 mm e-3 mm

Characteristic outer ring frequency, BPF0-C3 Characteristic inner ring frequency, BPFI-1.57 kg da min-NTN Da max-162 kN ras max-207 kN

L-102 mm L1-1.5 mm L2-60 mm L3-110 mm N-22 mm

r1a max-550 kN d-1.4 B-910 kN d1-90 kN e-1,800 rpm

C2-35.5 kN C3-1.4 Dw-34 kN Lw-4.15 kN Lubrication hole on outer ring-11,000 rpm

Characteristic cage frequency, FTF-8.36 Hz Characteristic rolling element frequency, BSF-10.64 Hz Characteristic outer ring frequency, BPF0-3.5 mm Characteristic inner ring frequency, BPFI-3.3 mm ra max-44.45 mm

Characteristic outer ring frequency, BPF0-1.5 mm Characteristic inner ring frequency, BPFI-1.5 mm ra max-1.5 mm r1a max-0.58 D-1.03

Mass-8.56 Hz Dynamic load, C-56.5 mm Rating life coefficient, A2-67 mm Static load, C0-83.5 mm Fatigue limit load, Cu-1 mm

Static load, C0-28.3 kN Fatigue limit load, Cu-3.45 kN Nlim (grease)-16,000 rpm Axial displacement K Factor-14,000 rpm Preload level--20 °C