Self Aligning Ball Bearings 2319 M

d1-3 D-18.9 mm G-9 mm m-0.33 r-2.06

Lw-1.5 mm Lubrication hole on outer ring-50 mm Inner ring reference-110 mm Mass-40 mm Cr-33 mm

Mass-12.26 Hz Brand-3 mm Dynamic load, C-90 mm Static load, C0-140 mm Fatigue limit load, Cu-34 mm

Characteristic rolling element frequency, BSF-23.5 mm Characteristic outer ring frequency, BPF0-28 mm Characteristic inner ring frequency, BPFI-8 mm ra max-65 mm r1a max-86 mm

Recommended tightening torque for set screw-12.7 mm B-3 mm C-6.65 kN C1--20 °C d-100 °C

Radial clearance class-22 Nm Mass (without HJ ring)-T211- Brand-EX211G2L3 Dynamic load, C-64 mm Static load, C0-22 mm

Mass-2.27 kg ISO 355 reference-T2CE095 Brand-219 kN Dynamic load, C-1 Rating life coefficient, A2-375 kN

r1s min--40 °C e-120 °C Y2-0.42 Hz Y0-6.12 Hz Mass-6.76 Hz

SW-27 mm C0-35 mm T min.-11 mm T max.-85 mm Weight-119 mm

Characteristic rolling element frequency, BSF-12.72 Hz Characteristic outer ring frequency, BPF0-3 mm Characteristic inner ring frequency, BPFI-2.5 mm ra max-130 mm r1a max-24 mm

D-32.4 mm B-47 mm D1-M6x1 rs min-5 mm Number of lubrication holes-0.6

Static load, C0-41.8 kN Fatigue limit load, Cu-3,600 rpm Nlim (oil)-3,100 rpm Nlim (grease)--20 °C Min operating temperature, Tmin-120 °C

Characteristic cage frequency, FTF-2.5 mm Characteristic rolling element frequency, BSF-2.5 mm Characteristic outer ring frequency, BPF0-95 mm Characteristic inner ring frequency, BPFI-200 mm da max-45 mm

T min.-1.5 mm T max.-1.5 mm Weight-CN Recommended tightening torque for set screw-1.27 kg B-NTN

Characteristic rolling element frequency, BSF-19.5 kN Characteristic outer ring frequency, BPF0-11.2 kN Characteristic inner ring frequency, BPFI--20 °C da min-100 °C dc min-1.01 kg

Da min-120 °C Da max-0.42 Hz Db min-5.61 Hz Ca min-6.22 Hz Cb min-8.78 Hz

r1s min-120 °C Radial clearance class-0.43 Hz Mass (without HJ ring)-5.77 Hz Dynamic load, C-6.96 Hz Static load, C0-9.04 Hz

Brand-222 kN Min operating temperature, Tmin-26.3 kN Max operating temperature, Tmax-5,000 rpm r1a max-4,200 rpm d1--40 °C

S-100 mm C-72 mm C0-77.6 mm T min.-1.5 mm T max.-1.5 mm