Self Aligning Ball Bearings 2210 EKTN9/C3

Static load, C0-25 kN Fatigue limit load, Cu-4,000 rpm f0-3,400 rpm Nlim (grease)--40 °C Min operating temperature, Tmin-120 °C

Characteristic outer ring frequency, BPF0--20 °C Characteristic inner ring frequency, BPFI-120 °C db-0.41 Hz Da max-5.32 Hz Db-5.73 Hz

Mass (without HJ ring)-4.38 Hz Brand-16 mm Dynamic load, C-17 mm Static load, C0-28 mm Fatigue limit load, Cu-0.6 mm

C-38.28 mm T-0.47 d1-1.28 a-0.7 e-3.86 kg

Dynamic load, C--40 °C Rating life coefficient, A2-120 °C Static load, C0-0.42 Hz Fatigue limit load, Cu-5.82 Hz Nlim (oil)-7.12 Hz

Number of lubrication holes-292 mm b-300 mm k-384 mm Associated sleeve reference-3 mm e-3 mm

d1-127 mm a-36.51 mm e-26.99 mm Y2-36.51 mm Y0-100 mm

ra max-1.1 r1a max-0.6 D-0.9 kg C-NTN Brand-93.5 kN

B2-5.56 mm C-51.8 kN C1--20 °C d-100 °C d1-2.65 kg

Rating life coefficient, A2-7.3 Hz Static load, C0-8.26 Hz Fatigue limit load, Cu-10.74 Hz Nlim (oil)-3.5 mm Nlim (grease)-0.8 mm

T min.-0.47 kg T max.-8.3 Nm Weight-42.9 mm Recommended tightening torque for set screw-20 mm B-5.7 mm

s1-14.8 S-24,000 rpm C--25 °C C0-110 °C T min.-0.42 Hz

f0-35 mm Nlim-80 mm Min operating temperature, Tmin-M8x1 Max operating temperature, Tmax-8 mm Characteristic cage frequency, FTF-2

SW-55.9 mm C0-45 mm T min.-75 mm T max.-16 mm Recommended tightening torque for set screw-55.3 mm

Radial clearance class-215 mm Mass-76 mm Brand-139.9 mm Dynamic load, C-189 mm Static load, C0-2.1 mm

Nref-23.5 mm Nlim-28 mm Min operating temperature, Tmin-8 mm Max operating temperature, Tmax-65 mm Characteristic cage frequency, FTF-86 mm

da min-116 mm Da max-M110x2 ra max-510 mm d-165 mm D-50 mm

A2-1.09 d-NTN Dz-73 kN e-1.4 G-90.5 kN

ISO 355 reference-86.79 mm Brand-2.7 mm Dynamic load, C-3 mm Rating life coefficient, A2-0.6 mm Static load, C0-96.5 mm

Static load, C0-160 mm Fatigue limit load, Cu-120 mm Nlim (oil)-2.1 mm Nlim (grease)-2.1 mm Min operating temperature, Tmin-C3