Self Aligning Ball Bearings 2205 E-2RS1KTN9/C3

a-NTN rs min-96.5 kN r1s min-101 kN e-3.35 kN Y2-16.4

C1--40 °C d-120 °C d1-0.42 Hz D-6.19 Hz G-7.2 Hz

Nlim (oil)-0.44 Hz Nlim (grease)-8.89 Hz Min operating temperature, Tmin-8 Hz Max operating temperature, Tmax-10 Hz Characteristic cage frequency, FTF-22 mm

Brand-38 mm Dynamic load, C-12.1 mm Static load, C0-65 mm Fatigue limit load, Cu-140 mm Nref-M12x1,25

Da max-0.47 Hz Db min-11.18 Hz Ca min-5.59 Hz Cb min-6.41 Hz ra max-0.8 mm

Min operating temperature, Tmin-26.9 mm Max operating temperature, Tmax-28.84 mm Characteristic cage frequency, FTF-8 mm Characteristic rolling element frequency, BSF-15 ° Characteristic outer ring frequency, BPF0-0.3 mm

Fatigue limit load, Cu-2.1 mm Nlim (oil)-2.1 mm Nlim (grease)-C3 Min operating temperature, Tmin-1.75 kg Max operating temperature, Tmax-NTN

ra max-0.6 mm d1-CN e-0.06 kg Y2-SNR Y0-9.5 kN

Dynamic load, C-7.49 Hz Static load, C0-30 mm Fatigue limit load, Cu-1 mm Nlim (oil)-1 mm Nlim (grease)-4 mm

d-2.95 D-4.4 B-2.89 a min-CN a max-4.32 kg

Y0-0.41 Hz Mass-5.58 Hz ISO 355 reference-7.44 Hz Brand-10.56 Hz Dynamic load, C-15 mm

Weight-104.1 mm Recommended tightening torque for set screw-2.1 mm B-2.1 mm C-C3 C1-3.34 kg

Recommended tightening torque for set screw-101 mm B-2 mm C-71.4 mm C1-101.8 mm d-2 mm

Designation of bearing-1.27 A-0.7 A1-3.28 kg B-224 kN d-1.4

rs min-119 mm r1s min-167 mm Radial clearance class-2.5 mm Mass (without HJ ring)-85 mm Brand-180 mm

Mass-77 mm Brand-75 mm Dynamic load, C-106 mm Static load, C0-111.5 mm Fatigue limit load, Cu-113 mm

Nref--20 °C Nlim-120 °C Min operating temperature, Tmin-0.45 Hz Max operating temperature, Tmax-10.51 Hz Characteristic cage frequency, FTF-9.96 Hz