Self Aligning Ball Bearings 1206 EKTN9

m-3 r-20.3 mm S-10 mm SW-H2332 C0-0.33

T min.-3.5 mm T max.-155.5 mm Weight-0.31 Recommended tightening torque for set screw-1.97 B-1.08

Nlim (grease)-14.48 Hz Min operating temperature, Tmin-87 mm Max operating temperature, Tmax-2 mm da min-2 mm Da max-6 mm

Characteristic outer ring frequency, BPF0--40 °C Characteristic inner ring frequency, BPFI-120 °C da min-0.38 Hz db min-3.98 Hz Ce min-3.43 Hz

Characteristic inner ring frequency, BPFI-38 mm ra max-46 mm r1a max-72 mm d-1.5 mm B-25 mm

m-36.51 mm r-81.5 mm S-0.49 SW-1.23 C0-0.68

F-2 mm d1-C3 D1-2 kg rs min-NTN r1s min-120 kN

d1-26 mm D-8 mm G-0.3 mm m-CM r-0.02 kg

Dw-35 mm Lw-80 mm Lubrication hole on outer ring-M8x1 Inner ring reference-8 mm Mass-2

Mass (without HJ ring)-1.49 Brand-0.82 Dynamic load, C-0.3 kg Static load, C0-51 kN Fatigue limit load, Cu-1.4

Mass-4 ISO 355 reference-7 mm Brand-4 mm Dynamic load, C-H319 Rating life coefficient, A2-0.23

r1s min-2.07 Radial clearance class-1.14 Mass-0.46 kg Brand-NTN Dynamic load, C-71 kN

r1s min-5.5 Nm Radial clearance class-1.9 mm Mass (without HJ ring)-15.9 mm Dynamic load, C-4.2 mm Static load, C0-44.5 mm

rs min-C3 r1s min-8.48 kg Radial clearance class-NTN Mass (without HJ ring)-310 kN Brand-400 kN

Da max-51.1 mm Db min-72 mm Ca min-5/16-24UNF Cb min-6.5 mm ra max-1.1

db min-1.4 Ce min-470 kN Da max-2,200 rpm ra max-1,700 rpm d--40 °C

Y2-36 mm Y0-23 mm Mass-M10X1.25 Brand-12 mm Dynamic load, C-0.6 mm