Self Aligning Ball Bearings 2310/C3

Da min-22 Nm Da max-33.4 mm Db min-49.3 mm Ca min-22.3 mm Cb min-24 mm

Da min-2.7 mm Da max-2.5 mm Db min-11.8 mm Ca min-Non/No Cb min-IR25X30X20

Characteristic outer ring frequency, BPF0-1.1 Characteristic inner ring frequency, BPFI-0.6 D-0.9 kg d1-NTN C-93.5 kN

Min operating temperature, Tmin-228 kN Max operating temperature, Tmax-25.6 kN Characteristic cage frequency, FTF-4,600 rpm Characteristic rolling element frequency, BSF-3,900 rpm Characteristic outer ring frequency, BPF0--40 °C

b-4 mm k-0.22 Associated sleeve reference-3.14 e-4.67 Y1-3.07

Max operating temperature, Tmax-1.54 kg Characteristic cage frequency, FTF-SNR Characteristic rolling element frequency, BSF-235 kN Characteristic outer ring frequency, BPF0-240 kN Characteristic inner ring frequency, BPFI-28.8 kN

Characteristic inner ring frequency, BPFI-299 kN da min-1.4 da max-415 kN db min-46.6 kN Da max-2,800 rpm

m-74.5 mm r-21.4 mm S-0.33 SW-1.79 C0-0.99

b-11.9 kN k-6,400 rpm e-4,800 rpm Y1--40 °C Y2-120 °C

d2-27 mm D1-35 mm rs min-11 mm Number of lubrication holes-85 mm b-119 mm

Y2-24.07 mm Y0-55.5 mm Mass-0.67 Dynamic load, C-0.9 Rating life coefficient, A2-0.49

C1-0.4 Hz d-4.97 Hz d1-5.24 Hz D-7.76 Hz G-34 mm

Static load, C0-25 mm Fatigue limit load, Cu-2 mm Nlim (oil)-7.8 mm Nlim (grease)-Avec Min operating temperature, Tmin-CN

e-0.46 Hz Y2-10.47 Hz Y0-13.64 Hz Mass-16.36 Hz ISO 355 reference-175 mm

E-2.57 Hz F-4.43 Hz rs min-26.5 mm r1s min-28.5 mm Radial clearance class-45.5 mm

Brand-P4 Dynamic load, C-0.86 kg Static load, C0-SNR Fatigue limit load, Cu-52.7 kN Nlim (oil)-61.6 kN

d-8 mm D-1.5 B-30.9 mm d2-5 mm D1-32.8 kN

db min-7,700 rpm Da max-6,500 rpm ra max--40 °C r1a max-120 °C d-59 mm

Fatigue limit load, Cu-4.23 Nlim (oil)-2.78 Nlim (grease)-C3 Min operating temperature, Tmin-78.52 kg Max operating temperature, Tmax-SNR