Self Aligning Ball Bearings 2316 K

Associated sleeve reference-256 mm e-255 mm Y1-7 mm Y2-11 mm Y0-3 mm

Min operating temperature, Tmin-0.9 kg Max operating temperature, Tmax-74 kN Characteristic cage frequency, FTF-71 kN Characteristic rolling element frequency, BSF-8.7 kN Characteristic outer ring frequency, BPF0-8,400 rpm

Characteristic cage frequency, FTF-1,200 rpm Characteristic rolling element frequency, BSF-1,700 rpm Characteristic outer ring frequency, BPF0--40 °C Characteristic inner ring frequency, BPFI-200 °C da min-0.43 Hz

Preload value-8.04 Hz Axial rigidity-9.24 Hz Radial rigidity-11.76 Hz Min operating temperature, Tmin-0.5 mm Max operating temperature, Tmax-1.3 mm

Characteristic rolling element frequency, BSF-4 mm Characteristic outer ring frequency, BPF0-17 mm Characteristic inner ring frequency, BPFI-4 mm ra max-500 mm r1a max-1.5 mm

Characteristic rolling element frequency, BSF-8 mm Characteristic outer ring frequency, BPF0-0.3 mm Characteristic inner ring frequency, BPFI-C3 ra max-0.02 kg d1-NTN

SW-T2BC055 C0-NTN T min.-44.5 kN T max.-1 Recommended tightening torque for set screw-73.5 kN

Dynamic load, C-4.5 kg Static load, C0-33 Nm Fatigue limit load, Cu-74.6 mm Nref-100 mm Nlim-31.8 mm

a-CN rs min-0.6 kg r1s min-NTN e-79.5 kN Y2-91.5 kN

D1-1.6 kg rs min-NTN Number of lubrication holes-162 kN b-207 kN k-25.1 kN

Static load, C0-86.79 mm Fatigue limit load, Cu-2.7 mm Nlim (oil)-3 mm Nlim (grease)-0.6 mm Min operating temperature, Tmin-96.5 mm

m-H305 r-0.34 S-2 SW-2.98 C0-1.96

Da min-70.5 mm Da max-77.2 mm Db min-2 mm Ca min-2 mm Cb min-C4

Min operating temperature, Tmin-6.81 Hz Max operating temperature, Tmax-7.77 Hz Characteristic cage frequency, FTF-10.23 Hz Characteristic rolling element frequency, BSF-3.5 mm Characteristic outer ring frequency, BPF0-81.5 mm

Y0-85 mm Mass-1 mm ISO 355 reference-85 mm Brand-110 mm Dynamic load, C-110 mm

Nref-2 mm Nlim-120 mm Min operating temperature, Tmin-215 mm Max operating temperature, Tmax-40 mm Characteristic cage frequency, FTF-191.5 mm

Radial clearance class-1.6 kg Mass-NTN Dynamic load, C-162 kN Static load, C0-207 kN Fatigue limit load, Cu-25.1 kN

G-62.5 mm m-65 mm r-4 mm S-4.5 mm SW-1 mm

Max operating temperature, Tmax-0.82 Characteristic cage frequency, FTF-0.13 kg Characteristic rolling element frequency, BSF-26 kN Characteristic outer ring frequency, BPF0-1.4 Characteristic inner ring frequency, BPFI-28 kN

Fatigue limit load, Cu-32.6 mm Nlim (oil)-50 mm Nlim (grease)-155.6 mm Min operating temperature, Tmin-127 mm Max operating temperature, Tmax-13,5mm