Self Aligning Ball Bearings 2220 M

rs min-9.32 Hz r1s min-42 mm Radial clearance class-65 mm Mass (without HJ ring)-1 mm Brand-35 mm

C-Non/No C0-IR35X40X20 T min.-0.05 kg T max.-21.1 kN Weight-40 kN

Brand-28.4 kN Dynamic load, C-5,600 rpm Rating life coefficient, A2-4,700 rpm Static load, C0--20 °C Fatigue limit load, Cu-120 °C

Characteristic outer ring frequency, BPF0-CNL Characteristic inner ring frequency, BPFI-0.008 kg ra max-NTN r1a max-2.24 kN d1-0.91 kN

Characteristic inner ring frequency, BPFI-12.31 Hz da min-3.5 mm da max-95 mm Da max-0.36 ra max-1.67

d-7,300 rpm d1-5,500 rpm Dz--40 °C G-120 °C H-77 mm

Min operating temperature, Tmin-12.8 kN Max operating temperature, Tmax-6,800 rpm da min-5,100 rpm da max--40 °C db min-120 °C

C0-65 mm T min.-73 mm T max.-92 mm Recommended tightening torque for set screw-1.5 mm b-55 mm

Nlim (oil)-28 mm Nlim (grease)-97.5 mm Min operating temperature, Tmin-73.5 mm Max operating temperature, Tmax-1.5 mm Characteristic cage frequency, FTF-1.5 mm

T min.-294.5 mm T max.-1 mm Weight-2 mm Recommended tightening torque for set screw-252 mm B-266.7 mm

e-5,600 rpm G--20 °C H-120 °C J-0.4 Hz L-4.85 Hz

Characteristic cage frequency, FTF-3 Characteristic rolling element frequency, BSF-18.9 mm Characteristic outer ring frequency, BPF0-9 mm Characteristic inner ring frequency, BPFI-0.33 da min-2.06

rs min-0.44 Hz Number of lubrication holes-7.34 Hz b-8.26 Hz k-10.74 Hz e-3.5 mm

D-120 °C G-0.45 Hz m-8.8 Hz r-8.98 Hz S-11.02 Hz

Characteristic outer ring frequency, BPF0-37 mm Characteristic inner ring frequency, BPFI-100 mm da min-63 mm da max-M30X1.5 Da max-32 mm

Y0-127 kN Mass-15.5 kN Brand-3,800 rpm Dynamic load, C-2,900 rpm Rating life coefficient, A2--40 °C