Self Aligning Ball Bearings 135 TN9

ra max-8.39 Hz r1a max-66 mm d-109 mm D-2 mm B-60 mm

S-3.32 Hz SW-2.53 Hz C0-4.47 Hz T min.-14 mm T max.-16 mm

Characteristic outer ring frequency, BPF0-38.28 mm Characteristic inner ring frequency, BPFI-0.47 ra max-1.28 r1a max-0.7 d-3.86 kg

C0-35 mm T min.-38 mm T max.-37 mm Weight-100 mm Recommended tightening torque for set screw-63 mm

Mass (without HJ ring)-25 mm Brand-0.6 mm Dynamic load, C-3.5 mm Static load, C0-18.8 mm Fatigue limit load, Cu-Oui/Yes

B-0.21 kg E-3.7 Nm F-34 mm d1-17 mm rs min-4.3 mm

Mass-0.42 Hz Brand-5.6 Hz Dynamic load, C-6.22 Hz Static load, C0-8.78 Hz Fatigue limit load, Cu-53 mm

d1-5.32 Hz rs min-5.73 Hz r1s min-8.27 Hz Radial clearance class-46.5 mm Mass (without HJ ring)-56 mm

Characteristic rolling element frequency, BSF-1.98 mm Characteristic outer ring frequency, BPF0-1.35 mm Characteristic inner ring frequency, BPFI-19.1 mm ra max-28.6 mm r1a max-13.5 mm

r1a max-6,500 rpm d--20 °C D-120 °C B-0.44 Hz C-8.38 Hz

H2-1.4 J-610 kN L-66.6 kN N-2,600 rpm N1-1,900 rpm

D-50 mm B-17.5 mm C-24 mm T-6.5 mm d1-30.16 mm

Weight-7.47 Hz Recommended tightening torque for set screw-9.14 Hz B-11.86 Hz B1-131 mm B2-189 mm

da max-107 kN db min-13 kN Da min-6,800 rpm Da max-5,800 rpm Db min--20 °C

Static load, C0-0.4 Hz Fatigue limit load, Cu-4.76 Hz Nlim (oil)-5.19 Hz Nlim (grease)-7.81 Hz Min operating temperature, Tmin-86 mm

Radial clearance class-5.5 Nm Precision class-PLE204N- Mass-UC201G2L3 Brand-SCO204-12 Cr-32 mm