Self Aligning Ball Bearings 2210 E-2RS1TN9/W64

Fatigue limit load, Cu-111 kN f0-13.4 kN Nlim (grease)-6,000 rpm Min operating temperature, Tmin-5,100 rpm Max operating temperature, Tmax--40 °C

Characteristic outer ring frequency, BPF0-17.5 mm Characteristic inner ring frequency, BPFI-54.5 mm ra max-13.9 mm r1a max-0.35 d1-1.72

Recommended tightening torque for set screw-13.2 Hz B-15.8 Hz C-8 mm C1-3.3 mm d-52.4 mm

Ca max-81.5 mm rs min-59.5 mm rNs min-1.1 mm D3 max-1.1 mm b min-CN

d1-1.4 C-97 kN F-11.8 kN B-6,800 rpm B1-5,100 rpm

T max.--30 °C Weight-120 °C Recommended tightening torque for set screw-0.37 Hz B-3.35 Hz B1-3.66 Hz

Characteristic cage frequency, FTF-9 mm Characteristic rolling element frequency, BSF-4 mm Characteristic outer ring frequency, BPF0-11.2 kN Characteristic inner ring frequency, BPFI--20 °C da min-100 °C

Characteristic cage frequency, FTF-4,500 rpm Characteristic rolling element frequency, BSF-3,300 rpm Characteristic outer ring frequency, BPF0--40 °C Characteristic inner ring frequency, BPFI-120 °C D-0.44 Hz

d-25 mm B-90 mm d1-66 mm e-1.5 mm Y2-1.1 mm

Y2-0.5 mm Y0-33.17 mm Mass-1.35 mm Brand-1.65 mm Dynamic load, C-0.4 mm

d1-26 mm D-0.3 mm G-Non/No m-1.8 mm r-P0

F-1.4 d1-140 kN rs min-17.1 kN r1s min-4,300 rpm Radial clearance class-3,200 rpm