Self Aligning Ball Bearings 2215 ETN9/W64

Cr-WS81112 C0r-GS81112 Nlim (grease)-80.1 mm Nlim (oil)-63.7 mm Min operating temperature, Tmin-0.08 kg

T max.-2 mm Weight-0.6 mm Recommended tightening torque for set screw-0.35 B-1.8 B1-2.8

ra max-179 mm D6-49.82 mm d1-0.49 d2-1.23 D1-0.68

d2-12.74 Hz D1-15.26 Hz rs min-132 mm Number of lubrication holes-130 mm e-157 mm

Max operating temperature, Tmax-0.42 Hz Characteristic cage frequency, FTF-5.79 Hz Characteristic rolling element frequency, BSF-6.24 Hz Characteristic outer ring frequency, BPF0-8.76 Hz Characteristic inner ring frequency, BPFI-51.5 mm

T min.-65.1 mm T max.-M6x1 Weight-5 mm B-0.6 B1-6.5 mm

Max operating temperature, Tmax-C3 Characteristic cage frequency, FTF-0.36 kg Characteristic rolling element frequency, BSF-NTN Characteristic outer ring frequency, BPF0-53 kN Characteristic inner ring frequency, BPFI-50 kN

m-17.5 mm r-20 mm S-5.8 mm SW-34.92 mm C0-51.1 mm

Designation of open end cover-Oui/Yes A-3 mm A1-Non/No B-CN d-P0

C-3.99 Hz F-3.05 Hz B-4.95 Hz B1-21 mm B2-24.1 mm

Nlim (grease)-10.81 Hz Min operating temperature, Tmin-3 mm Max operating temperature, Tmax-2.5 mm Characteristic cage frequency, FTF-140 mm Characteristic rolling element frequency, BSF-31.5 mm

Fatigue limit load, Cu-39.69 mm Nlim (oil)-30.39 mm Nlim (grease)-58 mm Min operating temperature, Tmin-0.27 Max operating temperature, Tmax-2.2

Number of lubrication holes-165.1 mm b-3 mm k-3 Associated sleeve reference-11.6 mm e-5 mm

Brand-6.34 Hz Min operating temperature, Tmin-7.64 Hz Max operating temperature, Tmax-10.36 Hz r1a max-112 mm d1-168 mm

Weight-6.85 Hz Recommended tightening torque for set screw-9.15 Hz B-131 mm C-204 mm C1-194 mm

Characteristic inner ring frequency, BPFI-145 mm da min-277 mm Da max-2.5 mm ra max-110 mm d-240 mm

Characteristic rolling element frequency, BSF-12.26 Hz Characteristic outer ring frequency, BPF0-3 mm Characteristic inner ring frequency, BPFI-90 mm da min-140 mm Da max-34 mm

r1s min-90 mm f0-33 mm Precision class-77.5 mm Mass-53.5 mm Brand-1.5 mm

d1-6 mm rs min-0.5 r1s min-8 mm Radial clearance class-3.97 mm Mass (without HJ ring)-11.5 kN