Self Aligning Ball Bearings 2206 E-2RS1TN9/W64

d-3.5 mm D-114.5 mm B-0.33 rs min-1.84 Radial clearance class-1.01

rs min-1.1 mm r1s min-0.5 mm e-86.79 mm Y2-2.7 mm Y0-3 mm

S-CN Z-0.74 kg C-62.5 kN C0-55 kN T min.-6.7 kN

da max-0.41 Hz db min-5.27 Hz Da max-6.57 Hz ra max-9.43 Hz r1a max-71 mm

Mass-63.4 mm ISO 355 reference-93.9 mm Brand-1.5 mm Dynamic load, C-3 Rating life coefficient, A2-6.4 mm

P 55°-11.5 Nm P 90°-49.2 mm P 120°-62.7 mm P 150°-18.3 mm P 180°-23 mm

Static load, C0-7.1 Hz Fatigue limit load, Cu-6.51 Hz Nlim (oil)-8.49 Hz Nlim (grease)-14.5 mm Min operating temperature, Tmin-14.5 mm

B1-7 mm B2-3.5 mm C-0.36 C1-1.87 d-2.79

Characteristic outer ring frequency, BPF0-1.6 kg Characteristic inner ring frequency, BPFI-NTN da min-162 kN da max-207 kN Da max-25.1 kN

Nlim-14.3 mm Min operating temperature, Tmin-0.44 Max operating temperature, Tmax-1.35 Characteristic cage frequency, FTF-0.74 Characteristic rolling element frequency, BSF-0.21 kg

C0-0.43 Hz T min.-6.83 Hz T max.-7.75 Hz Weight-10.25 Hz Recommended tightening torque for set screw-1.5 mm

Characteristic rolling element frequency, BSF-0.59 Characteristic outer ring frequency, BPF0-1.02 Characteristic inner ring frequency, BPFI-0.56 da min-0.25 kg da max-40 kN

L2-1.26 kg L3-NTN N-110 kN N1-113 kN N2-13.8 kN

Da max-81 mm Db min-87 mm Ca min-112 mm Cb min-1.5 mm ra max-1.5 mm

Radial clearance class-120 °C Mass (without HJ ring)-0.44 Hz Dynamic load, C-7.32 Hz Static load, C0-8.27 Hz Fatigue limit load, Cu-10.73 Hz

SW-32 mm Z-2 mm C-11.8 mm C0-Avec T min.-CN

B-17 mm A-4.3 mm A1-23.81 mm A2-37.4 mm d-52 mm

T max.-SNR Weight-1,140 kN Recommended tightening torque for set screw-1,570 kN Designation of housing-120 kN Designation of bearing-1,900 rpm

Precision class--20 °C Mass-100 °C Brand-2.58 kg Dynamic load, C-16.8 Nm Static load, C0-68.2 mm