Self Aligning Ball Bearings 2207 E-2RS1TN9/W64

Weight-236 mm Recommended tightening torque for set screw-266 mm Designation of housing-273 mm Designation of bearing-384 mm A-3 mm

Characteristic cage frequency, FTF-0.42 Hz Characteristic rolling element frequency, BSF-5.38 Hz Characteristic outer ring frequency, BPF0-6.73 Hz Characteristic inner ring frequency, BPFI-9.27 Hz da min-39 mm

rs min-0.13 kg r1s min-T2DB020 e-SNR Y2-29.6 kN Y0-1

D-8 mm B-303 mm E-3 mm F-150 mm rs min-320 mm

Weight-67 mm Recommended tightening torque for set screw-68.5 mm B-85 mm C-86.5 mm C1-90 mm

Designation of housing-M20x1,5 Designation of bearing-14.5 mm Designation of open end cover-3 B-46.8 mm A-10 mm

e-200 °C Y2-0.42 Hz Y0-5.62 Hz Mass-6.64 Hz ISO 355 reference-9.36 Hz

S-NTN SW-47.5 kN C0-1.4 T min.-59.5 kN T max.-7.3 kN

Dynamic load, C--40 °C Static load, C0-120 °C Fatigue limit load, Cu-0.4 Hz f0-4.86 Hz Nlim (oil)-5.21 Hz

Recommended tightening torque for set screw--40 °C B-120 °C B1-0.42 Hz B2-5.82 Hz C-7.12 Hz

C2-CN C3-P0 Dw-0.17 kg Lw-28.8 kN Lubrication hole on outer ring-66.5 kN

Characteristic cage frequency, FTF-CN Characteristic rolling element frequency, BSF-0.6 kg Characteristic outer ring frequency, BPF0-NTN Characteristic inner ring frequency, BPFI-79.5 kN da min-91.5 kN

Mass-SNR Brand-333 kN Dynamic load, C-444 kN Static load, C0-48.8 kN Fatigue limit load, Cu-2,900 rpm

Nlim (oil)-40 mm Nlim (grease)-52 mm Min operating temperature, Tmin-7 mm Max operating temperature, Tmax-0.3 mm Characteristic cage frequency, FTF-CN

Da max--20 °C ra max-100 °C E-1.78 kg F-43 mm rs min-59 mm

Max operating temperature, Tmax-3 mm r1a max-15.2 kN d--20 °C B-100 °C d1-5.5 Nm

Characteristic rolling element frequency, BSF-3.07 Characteristic outer ring frequency, BPF0-C2 Characteristic inner ring frequency, BPFI-3.99 kg da min-SNR Da max-446 kN

r1a max-P0 d-0.05 kg D-NTN B-37 mm C-0.3 mm

s1-47.62 mm S-67.2 mm C-90 mm C0-5/16-24UNF T min.-6.5 mm