Self Aligning Ball Bearings 2208 E-2RS1TN9

Characteristic outer ring frequency, BPF0-7.28 Hz Characteristic inner ring frequency, BPFI-36.5 mm da max-40 mm db min-48 mm Da min-65.5 mm

D-120 °C B-0.39 Hz C-4.17 Hz T-4.25 Hz d1-6.75 Hz

Characteristic cage frequency, FTF-8.58 Hz Characteristic rolling element frequency, BSF-11.42 Hz Characteristic outer ring frequency, BPF0-81 mm Characteristic inner ring frequency, BPFI-80 mm da max-110 mm

Static load, C0-0.18 kg Fatigue limit load, Cu-3.7 Nm f0-31 mm Nref-16 mm Nlim-4.4 mm

Nlim (oil)-1 mm Nlim (grease)-90 mm Min operating temperature, Tmin-66 mm Max operating temperature, Tmax-1.5 mm Characteristic cage frequency, FTF-1.1 mm

d2-1 D1-96.6 kN rs min-11.8 kN Number of lubrication holes-5,300 rpm b-9,200 rpm

ISO 355 reference-1.5 mm Dynamic load, C-35 mm Rating life coefficient, A2-80 mm Static load, C0-21 mm Fatigue limit load, Cu-50.6 mm

e-CN Y2-0.53 kg Y0-NTN Mass-72.5 kN ISO 355 reference-77.5 kN

T min.-1.1 mm T max.-CN Weight-0.18 kg Recommended tightening torque for set screw-61.5 kN B-68 kN

Characteristic outer ring frequency, BPF0-16.52 mm Characteristic inner ring frequency, BPFI-11.91 mm da min-15.88 mm da max-53 mm db min-14.48 mm

Characteristic outer ring frequency, BPF0-PAE206N- Characteristic inner ring frequency, BPFI-EX206G2 da min-SCCE206 Da max-SCOE206-30 ra max-38 mm

d2-2.1 mm D1-CN rs min-5.9 kg Number of lubrication holes-SNR b-339 kN

B-49.5 mm B1-53.9 mm B2-1.1 mm C-1.1 mm C1-CN

Characteristic rolling element frequency, BSF-0.38 kg Characteristic outer ring frequency, BPF0-NTN Characteristic inner ring frequency, BPFI-55.5 kN da min-55.5 kN Da max-6.8 kN

SW-120 °C C0-0.43 Hz T min.-6.67 Hz T max.-7.76 Hz Weight-10.24 Hz

Dynamic load, C-140 kN Rating life coefficient, A2-16.9 kN Static load, C0-6,100 rpm Fatigue limit load, Cu-8,200 rpm Nlim (oil)--40 °C