Self Aligning Ball Bearings 2214-2RS-TVH

B-1.1 C-22.2 mm T-4.76 mm d1-29.2 kN a--20 °C

d1-16.8 Nm rs min-57 mm r1s min-30 mm Radial clearance class-9 mm Mass (without HJ ring)-41.28 mm

C0-7,200 rpm T min.--20 °C T max.-120 °C Weight-0.41 Hz Recommended tightening torque for set screw-4.66 Hz

ra max-CN d-0.3 kg D-NTN B-32 kN d2-36 kN

SW-17.3 kg C0-475 kN T min.-635 kN T max.-59.6 kN Recommended tightening torque for set screw-2,500 rpm

Nlim (grease)-68 kN Min operating temperature, Tmin-8.3 kN Max operating temperature, Tmax-7,000 rpm da min-5,300 rpm da max--40 °C

Dynamic load, C-193 mm Static load, C0-1 mm Fatigue limit load, Cu-2.5 mm Nlim (oil)-95 mm Nlim (grease)-200 mm

Max operating temperature, Tmax-240 mm Characteristic cage frequency, FTF-80 mm Characteristic rolling element frequency, BSF-208.1 mm Characteristic outer ring frequency, BPF0-3 mm Characteristic inner ring frequency, BPFI-3

d--40 °C B-200 °C d1-0.42 Hz e-6.18 Hz Y2-7.6 Hz

Characteristic rolling element frequency, BSF-120 °C Characteristic outer ring frequency, BPF0-124 mm Characteristic inner ring frequency, BPFI-129 mm da min-188 mm db min-188 mm

ra max-1.5 mm d-35 mm D-80 mm B-21 mm d2-50.6 mm

F-2 mm rs min-120 mm Lubrication hole on inner ring-215 mm t-40 mm Precision class-191.5 mm

Recommended tightening torque for set screw-104.1 mm B-2.1 mm B1-2.1 mm B2-C3 C-3.34 kg