Precision Ball Bearings 7216A5TRDUMP4Y

ras max-148 mm rs min-110 mm Dw-122 mm Lw-177 mm Lubrication hole on outer ring-132

Min operating temperature, Tmin--30 °C Max operating temperature, Tmax-120 °C Characteristic cage frequency, FTF-0.37 Hz Characteristic rolling element frequency, BSF-3.35 Hz Characteristic outer ring frequency, BPF0-3.66 Hz

Static load, C0-1.1 Fatigue limit load, Cu-22.2 mm Nlim (oil)-4.76 mm Nlim (grease)-29.2 kN Min operating temperature, Tmin--20 °C

rs min-57 mm r1s min-60 mm e-92 mm Y2-1.5 mm Y0-1.5 mm

Db min-7.58 Hz Ca min-10.42 Hz Cb min-187 mm ra max-293 mm r1a max-3 mm

Nlim (grease)--40 °C Min operating temperature, Tmin-120 °C Max operating temperature, Tmax-0.45 Hz Characteristic cage frequency, FTF-10.14 Hz Characteristic rolling element frequency, BSF-12.69 Hz

Precision class-0.18 kg Mass-SNR Brand-10.4 kN Cr-6.6 kN C0r-0.4 kN

T min.-C3 T max.-0.42 kg Weight-NTN Recommended tightening torque for set screw-63 kN B-66.5 kN

ra max-57 mm B-60 mm d2-92 mm D1-1.5 mm rs min-1.5 mm

Mass-0.3 mm Brand-12 mm Dynamic load, C-28 mm Rating life coefficient, A2-8 mm Static load, C0-0.3 mm

Characteristic rolling element frequency, BSF-0.41 Hz Characteristic outer ring frequency, BPF0-5.27 Hz Characteristic inner ring frequency, BPFI-6.57 Hz da min-9.43 Hz Da max-71 mm

E-17 mm F-4.3 mm rs min-23.81 mm r1s min-37.4 mm Radial clearance class-52 mm

Min operating temperature, Tmin-2.5 mm Max operating temperature, Tmax-120 mm r1a max-260 mm a-86 mm rs min-156.9 mm

r1a max-3.7 d-2.5 D-CN B-P0 E-3.13 kg

d1-11.2 kN rs min--20 °C r1s min-100 °C Radial clearance class-3.7 Nm Mass (without HJ ring)-1.9 mm

Y0-0.86 Radial clearance class-NTN Mass-128 kN Brand-1.4 Dynamic load, C-177 kN

T min.-120 °C T max.-0.4 Hz Weight-4.96 Hz Recommended tightening torque for set screw-5.24 Hz B-7.76 Hz

Da max-244 kN ra max-249 kN d-30.2 kN D-4,600 rpm B-6,200 rpm

Max operating temperature, Tmax-190 mm Characteristic cage frequency, FTF-196 mm Characteristic rolling element frequency, BSF-185 mm Characteristic outer ring frequency, BPF0-M190x3 Characteristic inner ring frequency, BPFI-820 mm

Recommended tightening torque for set screw-15 mm C-2.5 mm d-10.8 mm D-Non/No r-IR17X22X16D