Precision Ball Bearings 2MM9106WI QUL

da min-11.5 Nm Da max-36.4 mm Db min-48.3 mm Dc max-15.9 mm ra max-19 mm

B-140 mm C-48 mm T-81.3 mm d1-121.2 mm a-2.1 mm

d1-0.43 Hz D-7.08 Hz G-7.78 Hz m-10.22 Hz r-0.5 mm

Radial clearance class-32 mm Mass (without HJ ring)-Oui/Yes Brand-3.5 mm Dynamic load, C-Non/No Static load, C0-C3

Static load, C0-56 mm Fatigue limit load, Cu-53 mm Nlim (oil)-1 mm Nlim (grease)-0.6 mm Min operating temperature, Tmin-30 mm

Nlim (oil)--40 °C Nlim (grease)-120 °C Min operating temperature, Tmin-0.48 Hz Max operating temperature, Tmax-19.49 Hz Characteristic cage frequency, FTF-23.77 Hz

Max operating temperature, Tmax-18.3 mm Characteristic cage frequency, FTF-18 mm Characteristic rolling element frequency, BSF-6.2 mm Characteristic outer ring frequency, BPF0-40 mm Characteristic inner ring frequency, BPFI-58 mm

Min operating temperature, Tmin-3 mm Max operating temperature, Tmax-15.2 kN Characteristic cage frequency, FTF--20 °C Characteristic rolling element frequency, BSF-100 °C Characteristic outer ring frequency, BPF0-5.5 Nm

Y0-SC 522 DS Mass-SC 522 LA Dynamic load, C-SC 522 SV Rating life coefficient, A2-SC 522 TA Static load, C0-SC 522 FS

Min operating temperature, Tmin-10.3 Hz Max operating temperature, Tmax-83 mm Characteristic cage frequency, FTF-87 mm Characteristic rolling element frequency, BSF-90 mm Characteristic outer ring frequency, BPF0-122 mm

Dynamic load, C-112 mm Static load, C0-220 mm Fatigue limit load, Cu-160 mm Nlim (oil)-172 mm Nlim (grease)-229 mm

Min operating temperature, Tmin-228 kN Max operating temperature, Tmax-236 kN Characteristic cage frequency, FTF-26.9 kN Characteristic rolling element frequency, BSF-4,000 rpm Characteristic outer ring frequency, BPF0-3,400 rpm

Recommended tightening torque for set screw-3.5 mm a-155.5 mm rs min-0.31 r1s min-1.97 e-1.08