Precision Ball Bearings C100HCDUL

Characteristic cage frequency, FTF-11.5 Nm Characteristic rolling element frequency, BSF-F206- Characteristic outer ring frequency, BPF0-EX206G2L3 Characteristic inner ring frequency, BPFI-36.4 mm ra max-31 mm

Nlim (grease)-3 mm Min operating temperature, Tmin-15.2 kN Max operating temperature, Tmax--20 °C Characteristic cage frequency, FTF-100 °C Characteristic rolling element frequency, BSF-5.5 Nm

Db max-103 mm ras max-22.5 mm d-M10 D-36.3 mm d1-18.8 mm

Weight-15.2 kN Recommended tightening torque for set screw--20 °C Designation of housing-100 °C Designation of bearing-0.56 kg Designation of open end cover-5.5 Nm

d2-4.72 Hz D1-5.61 Hz rs min-8.39 Hz Number of lubrication holes-82 mm b-76 mm

Brand-61 mm Min operating temperature, Tmin-16.1 mm Max operating temperature, Tmax-0.4 r1a max-1.49 d-0.82

E-0.43 Hz F-7.16 Hz d1-8.25 Hz rs min-10.75 Hz r1s min-0.8 mm

Static load, C0-1.15 kg Fatigue limit load, Cu-NTN Nlim (oil)-87 kN Nlim (grease)-86 kN Min operating temperature, Tmin-10.5 kN

Mass-0.43 Hz Brand-7.23 Hz Dynamic load, C-6.91 Hz Rating life coefficient, A2-9.09 Hz Static load, C0-94 mm

B-30 mm d1-44.1 mm d2-70 mm D1-M6x1 D2-42.9 mm

T-0.43 Hz a-6.7 Hz rs min-7.71 Hz r1s min-10.29 Hz e-3.5 mm

Nlim (grease)-NTN Nlim (oil)-98.5 kN Min operating temperature, Tmin-97 kN Max operating temperature, Tmax-8,800 rpm D-6,200 rpm

m-5.5 Nm r-1.9 mm S-15.9 mm SW-4.2 mm C0-44.5 mm

m-2,000 rpm r-1,500 rpm S--40 °C SW-120 °C C0-0.44 Hz

Designation of open end cover-28 mm A-42 mm B-1 mm A5-20 mm d-47 mm

da min-5.83 Hz dc min-6.7 Hz Da max-9.3 Hz ra max-30 mm d-30.5 mm