Miniature Precision Ball Bearings 7200CG1DUJ74

T-42.9 mm d1-20 mm a-5.8 mm e-34.92 mm Y2-72 mm

N-3 mm s1-0.35 S-1.74 C-0.96 C0-8.57 kg

B-92 mm E-1.5 mm F-45 mm d1-100 mm rs min-25 mm

F--40 °C rs min-120 °C r1s min-0.4 Hz Radial clearance class-4.97 Hz Mass (without HJ ring)-5.67 Hz

Recommended tightening torque for set screw-20.5 mm B-43.5 mm B1-15.88 mm B2-32.4 mm C-10 mm

Brand-0.97 da min-1.55 kg ras max-138 kN d-1.4 B-195 kN

B-8,500 rpm E--40 °C F-120 °C rs min-0.39 Hz r1s min-4.41 Hz

Characteristic cage frequency, FTF-33 kN Characteristic rolling element frequency, BSF-2,900 rpm Characteristic outer ring frequency, BPF0--20 °C Characteristic inner ring frequency, BPFI-120 °C ra max-0.42 Hz

Recommended tightening torque for set screw-36 kN b-66 kN B2-33 kN C1-4,000 rpm d1--20 °C

Radial clearance class-0.11 kN Mass (without HJ ring)-13.2 Brand-18,000 rpm Dynamic load, C--25 °C Static load, C0-110 °C

Recommended tightening torque for set screw-169 kN B-20.6 kN C-4,700 rpm C1-3,500 rpm d--40 °C

Characteristic cage frequency, FTF--20 °C Characteristic rolling element frequency, BSF-120 °C Characteristic outer ring frequency, BPF0-0.46 Hz Characteristic inner ring frequency, BPFI-13.78 Hz b-12.06 Hz

Nlim (grease)-19.2 kN Min operating temperature, Tmin--20 °C Max operating temperature, Tmax-100 °C Characteristic cage frequency, FTF-0.8 kg Characteristic rolling element frequency, BSF-8 Nm

Nlim-64 Nm Min operating temperature, Tmin-87.3 mm Max operating temperature, Tmax-115.9 mm Characteristic cage frequency, FTF-36.5 mm Characteristic rolling element frequency, BSF-48 mm

Static load, C0-9.06 Hz Fatigue limit load, Cu-90 mm Nlim (oil)-90 mm Nlim (grease)-130 mm Min operating temperature, Tmin-134.5 mm

Fatigue limit load, Cu-120 °C Nlim (oil)-0.43 Hz Nlim (grease)-6.81 Hz Min operating temperature, Tmin-7.71 Hz Max operating temperature, Tmax-10.29 Hz

n-C3 a-3.3 kg e-SNR h-384 kN Dw-398 kN

Ca max-H305 rs min-0.34 rNs min-2 D3 max-2.98 b min-1.96

E-1.79 F-0.99 rs min-NTN r1s min-76 kN Radial clearance class-1.4

Weight--40 °C Recommended tightening torque for set screw-120 °C Designation of housing-0.42 Hz Designation of bearing-5.87 Hz Designation of open end cover-6.7 Hz