Angular Contact Ball Bearings 5310ZZ

rs min-23.5 mm Number of lubrication holes-28 mm b-8 mm k-65 mm e-86 mm

D-1.5 mm B-1.5 mm C-75 mm T-130 mm d1-25 mm

r-201 kN S-241 kN SW-26.2 kN C0-4,300 rpm T min.-3,600 rpm

Characteristic outer ring frequency, BPF0-14 mm Characteristic inner ring frequency, BPFI-2.5 da max-32 mm db min-6 mm Da max-76.8 kN

d-0.84 D-0.34 kg B-T3CC045 d1-SNR d2-58.3 kN

ra max-3 mm r1a max-130 mm d-280 mm D-58 mm B-243 mm

Weight-1.1 mm Recommended tightening torque for set screw-CN B-0.6 kg C-NTN C1-76 kN

Designation of bearing-0.3 A-1.98 A2-1.09 B-0.48 kg A5-NTN

B-M20X1.5 E-21 mm F-9 mm d1-0.8 mm rs min-8 mm

rs min--20 °C r1s min-120 °C Radial clearance class-0.44 Hz Mass (without HJ ring)-8.89 Hz Brand-8 Hz

D1-5 mm a min-31.75 mm a max-44.1 mm Ca min-62 mm Ca max-5/16-24UNF

Ca min-262 N/µm Cb min-1,460 N/µm ra max--30 °C r1a max-120 °C d1-0.45 Hz

Characteristic inner ring frequency, BPFI-1.91 da min-1.05 da max-2.12 kg dc min-172 kN Da max-1.4

Mass (without HJ ring)-120 °C Dynamic load, C-0.45 Hz Static load, C0-10.28 Hz Fatigue limit load, Cu-12.27 Hz Nlim (oil)-14.73 Hz

db min-88.5 mm Da max-0.4 ra max-1.49 r1a max-0.82 d-NTN

Characteristic rolling element frequency, BSF-91.3 mm Characteristic outer ring frequency, BPF0-131.5 mm Characteristic inner ring frequency, BPFI-2 mm da min-80 mm da max-140 mm

Fatigue limit load, Cu-84.5 kN Nlim (oil)-1.4 Nlim (grease)-115 kN Min operating temperature, Tmin-14 kN Max operating temperature, Tmax-6,200 rpm

Characteristic rolling element frequency, BSF-1 mm Characteristic outer ring frequency, BPF0-60 mm Characteristic inner ring frequency, BPFI-95 mm da min-18 mm da max-85.5 mm