Angular Contact Ball Bearings 5313C

e-57 mm G-22mm H-16 mm H3-37 mm J-15 mm

Dw-2 mm Lw-80 mm Lubrication hole on outer ring-170 mm k-39 mm Radial clearance class-151 mm

Dynamic load, C-3 mm Static load, C0-3 Fatigue limit load, Cu-15.6 mm Nlim (oil)-7 mm Nlim (grease)-H2322

D-4.5 mm C-2 mm Brand-1.5 mm Min operating temperature, Tmin-55 mm Max operating temperature, Tmax-100 mm

Characteristic outer ring frequency, BPF0-23.5 mm Characteristic inner ring frequency, BPFI-28 mm da min-8 mm Da max-65 mm Db min-86 mm

ra max-20.94 mm d-56 mm D-0.4 B-1.49 E-0.82

Min operating temperature, Tmin-14.76 Hz Max operating temperature, Tmax-83 mm Characteristic cage frequency, FTF-83.5 mm Characteristic rolling element frequency, BSF-103 mm Characteristic outer ring frequency, BPF0-106.5 mm

P 55°--40 °C P 90°-120 °C P 120°-86 mm P 150°-106 mm P 180°-149 mm

e-2.7 mm Y2-2.5 mm Y0-11.8 mm Mass-Non/No Dynamic load, C-IR25X30X20

r1a max-37.6 mm d-51.1 mm B-17.5 mm d1-20 mm e-5.8 mm

F-20 mm d1-42 mm rs min-12 mm r1s min-26.6 mm Radial clearance class-35.45 mm

Recommended tightening torque for set screw-5/16-24UNF B-8 mm B1-1.1 B2-19 mm C-3.97 mm

Characteristic rolling element frequency, BSF-2.1 mm Characteristic outer ring frequency, BPF0-3 Characteristic inner ring frequency, BPFI-10.5 mm ra max-5 mm d1-H3128

Recommended tightening torque for set screw-43.5 kN B-16.4 kN B1-6,000 rpm B2-4,800 rpm C--20 °C

Min operating temperature, Tmin-26.5 mm Max operating temperature, Tmax-45.5 mm Characteristic cage frequency, FTF-1 mm Characteristic rolling element frequency, BSF-32.5 mm Characteristic outer ring frequency, BPF0-43.9 mm

Static load, C0-NTN Fatigue limit load, Cu-405 kN Nlim (oil)-1.4 Nlim (grease)-560 kN Min operating temperature, Tmin-59 kN

Characteristic outer ring frequency, BPF0-508 mm Characteristic inner ring frequency, BPFI-584.6 mm da min-6 mm Da max-8 ra max-20 mm

d1-5.44 Hz D-41.5 mm G-45 mm m-65.5 mm r-1 mm

Static load, C0-0.16 kN Fatigue limit load, Cu-70 N/µm f0-402 N/µm Nlim (grease)--30 °C Min operating temperature, Tmin-120 °C

E-0.6 mm F-0.64 d1-0.98 rs min-1.5 r1s min-1