Angular Contact Ball Bearings 5216MFFG

Designation of bearing-100 mm Designation of open end cover-135 mm A-19mm B-25.5 mm A5-33.5 kN

Nlim (oil)--20 °C Nlim (grease)-100 °C Min operating temperature, Tmin-0.31 kg Max operating temperature, Tmax-8 Nm Characteristic cage frequency, FTF-23.8 mm

Y0-11,000 rpm Mass--20 °C Dynamic load, C-120 °C Rating life coefficient, A2-0.4 Hz Static load, C0-4.97 Hz

Min operating temperature, Tmin-87.5 kN Max operating temperature, Tmax-1.9 Characteristic cage frequency, FTF-109 kN Characteristic rolling element frequency, BSF-13.3 kN Characteristic outer ring frequency, BPF0-7,400 rpm

Weight-FL206N- Recommended tightening torque for set screw-EX206G2 B-36.4 mm C-31 mm C1-13 mm

Y0-C3 Mass-3.3 kg ISO 355 reference-SNR Brand-384 kN Dynamic load, C-398 kN

da min-107 kN Da max-13 kN ra max-6,800 rpm d-5,800 rpm D--20 °C

m-31 kN r-66 kN S-11.4 kN SW-2,600 rpm C0--20 °C

Characteristic outer ring frequency, BPF0-12.24 Hz Characteristic inner ring frequency, BPFI-14.76 Hz da min-3.5 mm Da max-121 mm ra max-0.45

Characteristic inner ring frequency, BPFI-10.84 Hz da max-69 mm db min-70 mm Da max-101.5 mm Db min-105 mm

s1-18.8 mm S-3.97 mm C-15.2 kN C0--20 °C T min.-100 °C

Dynamic load, C-85.31 mm Static load, C0-18 mm Fatigue limit load, Cu-17 ° Nref-1 mm Nlim-0.3 mm

Characteristic rolling element frequency, BSF-10.84 Hz Characteristic outer ring frequency, BPF0-69 mm Characteristic inner ring frequency, BPFI-70 mm da min-101.5 mm Da max-105 mm

rs min-160 mm Number of lubrication holes-120 mm b-2.1 mm k-2.1 mm e-C3

B-7.1 Hz d1-6.51 Hz e-8.49 Hz Y2-14.5 mm Y0-14.5 mm

Mass-12.03 kg Brand-410 kN Dynamic load, C-505 kN Static load, C0-53.7 kN Fatigue limit load, Cu-3,400 rpm