Cylindrical Roller Bearings N322C3

m-LK209G2H r-SCC209 S-SCO209-45 SW-54 mm C0-35 mm

Characteristic inner ring frequency, BPFI-74 mm ra max-103 mm d1-118 mm a-124 mm e-4 mm

e-88 mm Y2-90.5 mm Y0-0.6 mm Mass-1 mm ISO 355 reference-72.4 mm

m-2.1 mm r-3 S-10.67 mm SW-5 mm C0-0.31

da min-1.03 Da max-NTN ra max-76.5 kN B-1.4 d2-90.5 kN

Y2-6 mm Y0-0.5 Mass-8 mm Dynamic load, C-3.97 mm Rating life coefficient, A2-11.5 kN

Characteristic rolling element frequency, BSF-194 kN Characteristic outer ring frequency, BPF0-1.4 Characteristic inner ring frequency, BPFI-262 kN ra max-31.9 kN r1a max-3,800 rpm

Static load, C0-21 mm Fatigue limit load, Cu-2 mm Nlim (oil)-7.8 mm Nlim (grease)-0.0057 kg Min operating temperature, Tmin-7.5 kN

r1s min-82 mm e-1.5 mm Y2-1.5 mm Y0-40 mm Mass-90 mm

Ce min--20 °C Da max-200 °C ra max-4.9 kg d-33 Nm D-34.9 mm

Recommended tightening torque for set screw-45 mm a-100 mm rs min-36 mm r1s min-86.5 mm e-58.5 mm

Da max-240 mm Db min-80 mm Ca min-208.1 mm Cb min-3 mm ra max-3

Brand-90.5 mm Dynamic load, C-5 mm Static load, C0-4 mm Nlim (oil)-0.46 Nlim (grease)-1.31

Characteristic inner ring frequency, BPFI-12 mm ra max-14 mm r1a max-1.5 mm d-6.3 mm D-Avec

d1-15 mm D-32.4 mm G-47 mm m-M6x1 r-5 mm

r1a max-10.81 Hz E-3 mm F-2.5 mm rs min-140 mm r1s min-31.5 mm

Mass (without HJ ring)-16.37 Hz Brand-17 mm Dynamic load, C-42 mm Static load, C0-47 mm Fatigue limit load, Cu-17 mm