Deep Groove Ball Bearings 6318-2NSLC3

rs min-7.59 Hz r1s min-17.5 mm Radial clearance class-17.5 mm Mass (without HJ ring)-25.5 mm Brand-25.5 mm

D1-2.5 mm rs min-130 mm Number of lubrication holes-230 mm b-64 mm k-204 mm

Nlim (oil)-C3 Nlim (grease)-28.7 kg Min operating temperature, Tmin-SNR Max operating temperature, Tmax-1,450 kN Characteristic cage frequency, FTF-1,660 kN

Da max-2,300 rpm Db max--40 °C r1a max-120 °C ra max-0.45 Hz D6-9.18 Hz

Brand--60 °C Dynamic load, C-0.42 Hz Static load, C0-5.85 Hz Fatigue limit load, Cu-4.59 Hz f0-6.41 Hz

ra max-2,900 rpm d--40 °C D-120 °C B-0.45 Hz E-9.37 Hz

r1a max-0.9 kN d-15.6 D-8,900 rpm B-11,000 rpm E--20 °C

r-75 mm S-55 mm SW-59 mm C0-1.1 mm T min.-1.1 mm

Ca min-194 kN Cb min-1.4 ra max-262 kN r1a max-31.9 kN d1-3,800 rpm

Characteristic rolling element frequency, BSF-3,100 rpm Characteristic outer ring frequency, BPF0--40 °C Characteristic inner ring frequency, BPFI-120 °C da min-0.46 Hz da max-10.6 Hz

Characteristic outer ring frequency, BPF0-15.5 mm Characteristic inner ring frequency, BPFI-12.7 mm da min-12.8 kN Da max-6.65 kN ra max--40 °C

Dynamic load, C-0.44 Hz Static load, C0-8.89 Hz Fatigue limit load, Cu-8 Hz f0-10 Hz Nlim (grease)-22 mm

Lubrication hole on inner ring-179 kN t-21.8 kN Precision class-4,400 rpm Mass-3,300 rpm Brand--40 °C

da max-1.5 mm Da max-1.5 mm ra max-C3 d-1.21 kg D-NTN