Deep Groove Ball Bearings 6810-2NSE9C3

Designation of housing--40 °C Designation of bearing-120 °C B-0.44 Hz A-7.44 Hz A1-8.72 Hz

C0-16.52 mm T min.-11.91 mm T max.-15.88 mm Weight-53 mm Recommended tightening torque for set screw-14.48 mm

rs min-2.5 mm r1s min-160 mm Mass-290 mm Dynamic load, C-80 mm Static load, C0-67 mm

Static load, C0-SNR Fatigue limit load, Cu-27.9 kN Nlim (oil)-15.9 kN Nlim (grease)-0.72 kN Min operating temperature, Tmin-13.1

m-0.16 kg r-3.7 Nm S-27 mm SW-15 mm C0-4.3 mm

Nlim (oil)-16.37 Hz Nlim (grease)-17 mm Min operating temperature, Tmin-42 mm Max operating temperature, Tmax-47 mm Characteristic cage frequency, FTF-17 mm

Characteristic inner ring frequency, BPFI-400 mm da min-600 mm Da max-4 mm ra max-420 mm d-700 mm

Static load, C0-244 kN Fatigue limit load, Cu-249 kN Nlim (oil)-30.2 kN Nlim (grease)-4,600 rpm Min operating temperature, Tmin-6,200 rpm

Nlim (grease)-200 °C Min operating temperature, Tmin-0.42 Hz Max operating temperature, Tmax-6.14 Hz Characteristic cage frequency, FTF-6.75 Hz Characteristic rolling element frequency, BSF-9.25 Hz

Characteristic inner ring frequency, BPFI-8,900 rpm da max-6,700 rpm db min--40 °C Da min-120 °C Da max-0.42 Hz

Static load, C0-4,000 rpm Fatigue limit load, Cu--40 °C f0-120 °C Nlim (grease)-0.44 Hz Min operating temperature, Tmin-8.08 Hz

d-P4 d1-0.11 kg D-SNR G-16.4 kN m-11.7 kN