Deep Groove Ball Bearings 6310-2NSE9C3

da max-20 Nm db min-Avec Da min-CN Da max-P0 Db min-0.1 kg

B-1 mm E-80 mm F-110 mm d1-25 mm rs min-90 mm

Dynamic load, C-5.79 Hz Rating life coefficient, A2-6.24 Hz Static load, C0-8.76 Hz Fatigue limit load, Cu-51.5 mm Nlim (oil)-61 mm

Characteristic outer ring frequency, BPF0-0.18 kg Characteristic inner ring frequency, BPFI-3.7 Nm ra max-31 mm d1-16 mm e-4.4 mm

Nlim-12 mm Min operating temperature, Tmin-3.6 mm Max operating temperature, Tmax-12 mm Characteristic cage frequency, FTF-40 mm Characteristic rolling element frequency, BSF-M5x0,8

Lubrication hole on inner ring-8 mm t-1.5 Precision class-30.9 mm Mass-5 mm Brand-32.8 kN

E-0.41 Hz F-5.27 Hz d1-6.57 Hz rs min-9.43 Hz r1s min-86 mm

Radial clearance class-5.92 Hz Mass (without HJ ring)-8.08 Hz Brand-51.5 mm Dynamic load, C-54 mm Static load, C0-57 mm

Fatigue limit load, Cu-0.4 Hz Nlim (oil)-4.95 Hz Nlim (grease)-4.83 Hz Min operating temperature, Tmin-7.17 Hz Max operating temperature, Tmax-64 mm

Recommended tightening torque for set screw-NTN B-248 kN C-287 kN C1-34.7 kN d-4,800 rpm

T min.-2 mm T max.-2 mm Weight-C3 Recommended tightening torque for set screw-1.54 kg B-SNR

m3-26 mm n1-0.6 mm m2-18.6 mm n2-25.3 mm diameter dowel pins-0.6 mm

F-C3 d1-4.22 kg rs min-NTN r1s min-256 kN Radial clearance class-282 kN

Fatigue limit load, Cu-8.2 kN Nlim (oil)-6,000 rpm Nlim (grease)--20 °C Min operating temperature, Tmin-120 °C Max operating temperature, Tmax-0.45 Hz