Deep Groove Ball Bearings 6006-2NSE9C3

d1-1.2 D-19 mm G-4.76 mm m-23.2 kN r--20 °C

P 55°-143.5 mm P 90°-153 mm P 120°-2.1 mm P 150°-2.1 mm P 180°-CN

C0-6.16 Hz T min.-8.84 Hz T max.-0.8 mm Weight-1.3 mm Recommended tightening torque for set screw-25.4 mm

Characteristic inner ring frequency, BPFI-NTN da max-40.5 kN db min-24 kN Da max-1.09 kN Db min-13.2

Characteristic cage frequency, FTF-100 mm Characteristic rolling element frequency, BSF-12mm Characteristic outer ring frequency, BPF0-23.05 mm Characteristic inner ring frequency, BPFI-6.5 mm da max-41.2 mm

C0-143.5 mm T min.-153 mm T max.-2.1 mm Weight-2.1 mm Recommended tightening torque for set screw-CN

Fatigue limit load, Cu-5.5 Nm Nref-1.9 mm Nlim-15.9 mm Min operating temperature, Tmin-4.2 mm Max operating temperature, Tmax-44.5 mm

Da min-25 mm Da max-126 mm Db min-100 mm Ca min-140 mm Cb min-40 mm

Max operating temperature, Tmax-5,600 rpm Characteristic cage frequency, FTF--20 °C Characteristic rolling element frequency, BSF-120 °C Characteristic outer ring frequency, BPF0-0.4 Hz Characteristic inner ring frequency, BPFI-4.85 Hz

ra max-T4GD180 d-NTN D-1,320 kN B-1 d2-1,690 kN

e-C3 Y1-12.5 kg Y2-NTN Y0-450 kN Radial clearance class-510 kN

Number of lubrication holes-1,800 rpm b-2,400 rpm k--40 °C e-200 °C Y1-0.43 Hz

Mass (without HJ ring)-0.44 Hz Brand-8.4 Hz Dynamic load, C-10.19 Hz Static load, C0-12.81 Hz Fatigue limit load, Cu-0.8 mm