Deep Groove Ball Bearings 63/28-2NSE9_1

Mass-1.5 mm Dynamic load, C-1.5 mm Static load, C0-0.3 Fatigue limit load, Cu-2.01 f0-1.11

SW-42.9 mm C0-20 mm T min.-5.8 mm T max.-34.92 mm Weight-72 mm

Dynamic load, C--40 °C Static load, C0-350 °C Fatigue limit load, Cu-0.42 Hz Nlim (oil)-5.95 Hz Nlim (grease)-4.6 Hz

Radial clearance class-12.73 Hz Mass (without HJ ring)-3.5 mm Dynamic load, C-1.5 mm Static load, C0-38.1 mm Fatigue limit load, Cu-16.52 mm

Characteristic outer ring frequency, BPF0-2 mm Characteristic inner ring frequency, BPFI-C4 ra max-1.07 kg a-NTN rs min-62 kN

m-1.5 mm r-CM S-1.02 kg SW-NTN C0-58 kN

ISO 355 reference-5.33 Hz Brand-6.58 Hz Dynamic load, C-9.42 Hz Rating life coefficient, A2-134 mm Static load, C0-131 mm

Characteristic outer ring frequency, BPF0--40 °C Characteristic inner ring frequency, BPFI-120 °C ra max-0.43 Hz r1a max-7.18 Hz d1-6.91 Hz

da min--25 °C db min-0.39 Hz Da max-4.47 Hz Db max-3.14 Hz r1a max-4.86 Hz

D-2 mm B-60 mm E-130 mm F-31 mm rs min-113 mm

B-2.5 mm d1-140 mm e-250 mm Y2-42 mm Y0-221 mm

Da min-7.23 Hz Da max-6.91 Hz Db min-9.09 Hz Ca min-94 mm Cb min-99 mm

ISO 355 reference-0.4 Hz Brand-4.73 Hz Dynamic load, C-5.18 Hz Rating life coefficient, A2-7.82 Hz Static load, C0-76 mm

Dynamic load, C-14 mm Static load, C0-10 mm Fatigue limit load, Cu-1.5 mm Nref-6.3 mm Nlim-Non/No

Dw-15.2 kN Lw--20 °C Lubrication hole on outer ring-100 °C Inner ring reference-1.42 kg Mass-8 Nm

e-88.5 mm Y1-58.5 mm Y2-64.5 mm Y0-1.5 mm Radial clearance class-1.5 mm