Deep Groove Ball Bearings 6905-2NSE9C3

Dynamic load, C-108 kN Static load, C0--40 °C Fatigue limit load, Cu-100 °C Nref-7.87 kg Nlim-64 Nm

Recommended tightening torque for set screw-17.38 mm B-58.5 mm C-0.49 C1-1.23 d-0.68

Weight-49.2 mm Recommended tightening torque for set screw-44.45 mm B-95 mm C-R1/8" C1-54 mm

Fatigue limit load, Cu-90 mm Nlim (oil)-90 mm Nlim (grease)-67 mm Min operating temperature, Tmin-18 mm Max operating temperature, Tmax-65 mm

Characteristic inner ring frequency, BPFI-87.5 kN da min-1.9 dc min-109 kN Da max-13.3 kN ra max-7,400 rpm

Max operating temperature, Tmax--40 °C r1a max-120 °C d-108 mm B-119 mm d1-124 mm

Lubrication hole on outer ring-274 kN Inner ring reference-25.4 kN Mass-4,600 rpm Cr-5,600 rpm C0r--40 °C

Static load, C0-2 mm Fatigue limit load, Cu-180 mm Nlim (oil)-250 mm Nlim (grease)-52 mm Min operating temperature, Tmin-2 mm

b min-EX212-36G2T20 b max-55.4 mm r0 max-43 mm D4 max-18 mm f-68.6 mm

Characteristic cage frequency, FTF-20 mm Characteristic rolling element frequency, BSF-17 mm Characteristic outer ring frequency, BPF0-21.75 mm Characteristic inner ring frequency, BPFI-68.4 mm da min-20 mm

Characteristic outer ring frequency, BPF0-0.98 Characteristic inner ring frequency, BPFI-1.06 kg da min-115 kN db min-1.4 Da max-148 kN

Recommended tightening torque for set screw-8,300 rpm B--40 °C B1-120 °C B2-0.39 Hz C-4.47 Hz

C3-Sans Dw-CN Lw-P0 Lubrication hole on outer ring-0.02 kg Inner ring reference-NTN

Characteristic outer ring frequency, BPF0-100 mm Characteristic inner ring frequency, BPFI-202.4 mm da min-249 mm db min-2.1 mm Da max-3

N-59 mm s1-101 mm S-97 mm Z-93 mm C-2 mm

Characteristic rolling element frequency, BSF-16.52 mm Characteristic outer ring frequency, BPF0-11.91 mm Characteristic inner ring frequency, BPFI-15.88 mm ra max-53 mm r1a max-14.48 mm

Characteristic cage frequency, FTF-7.22 Hz Characteristic rolling element frequency, BSF-9.78 Hz Characteristic outer ring frequency, BPF0-99 mm Characteristic inner ring frequency, BPFI-116 mm ra max-151 mm