Deep Groove Ball Bearings 6300-2NSE9C3

e-0.43 Hz Y2-7.16 Hz Y0-8.25 Hz Mass-10.75 Hz ISO 355 reference-0.8 mm

d-14.3 mm D-0.44 B-1.35 d2-0.74 D1-0.21 kg

Characteristic inner ring frequency, BPFI-C3 da min-8.05 kg Da max-NTN ra max-299 kN d1-335 kN

Characteristic inner ring frequency, BPFI-0.43 Hz da min-6.57 Hz da max-8.1 Hz Da max-10.9 Hz ra max-79 mm

D2-12.72 Hz a-3 mm Contact angle α-2.5 mm rs min-130 mm r1s min-24 mm

Cr-13.5 mm C0r-NTN Nlim (grease)--40 °C Nlim (oil)-120 °C Min operating temperature, Tmin-1.5 mm

Static load, C0-0.4 Hz Fatigue limit load, Cu-4.71 Hz Nlim (oil)-5.18 Hz Nlim (grease)-7.82 Hz Min operating temperature, Tmin-64 mm

Mass--40 °C ISO 355 reference-120 °C Brand-0.4 Hz Dynamic load, C-4.98 Hz Rating life coefficient, A2-4.44 Hz

da max--20 °C dc min-100 °C Da max-10.97 kg ra max-68 mm d-97 mm

Inner ring reference--40 °C Lubrication hole on inner ring-120 °C Radial clearance class-0.43 Hz Precision class-7.14 Hz Mass-8.23 Hz

Characteristic inner ring frequency, BPFI-36 kN ra max-4.4 kN r1a max-9,900 rpm d-14,000 rpm D--20 °C

Characteristic rolling element frequency, BSF-3.3 mm Characteristic outer ring frequency, BPF0-76.2 mm Characteristic inner ring frequency, BPFI-29.77 mm ra max-109.5 mm r1a max-0.44

Nlim-12.7 mm Min operating temperature, Tmin-M6x1 Max operating temperature, Tmax-31.8 mm Characteristic cage frequency, FTF-12.5 mm Characteristic rolling element frequency, BSF-63.7 mm

Recommended tightening torque for set screw-274 kN B-25.4 kN B1-4,600 rpm B2-5,600 rpm C--40 °C