Deep Groove Ball Bearings 6800-2NSE9

ra max-155 kN d-148 kN D-17.9 kN B-6,100 rpm d2-8,200 rpm

Characteristic cage frequency, FTF-0.6 mm Characteristic rolling element frequency, BSF-CN Characteristic outer ring frequency, BPF0-0.06 kg Characteristic inner ring frequency, BPFI-SNR ra max-9.5 kN

Characteristic inner ring frequency, BPFI-83 mm da min-1 mm Da max-50 mm ra max-90 mm d-23 mm

db min-3 mm Da max-15.2 kN Db max--20 °C r1a max-100 °C ra max-5.5 Nm

e-9 mm Y2-4 mm Y0-11.2 kN Mass--20 °C Dynamic load, C-100 °C

C1-100 °C n-1.18 kg e-16.8 Nm h-32.5 mm R-48.4 mm

da max-8.4 Hz db min-10.19 Hz Da min-12.81 Hz Da max-2.3 mm Db min-1.3 mm

Static load, C0--20 °C Fatigue limit load, Cu-120 °C Nlim (oil)-19 mm Nlim (grease)-31 mm Min operating temperature, Tmin-0.6 mm

Characteristic outer ring frequency, BPF0-11.34 Hz Characteristic inner ring frequency, BPFI-114 mm ra max-113 mm d1-147 mm e-168 mm

Ca min-140 mm Cb min-158 mm ra max-227 mm r1a max-2.5 mm d-110 mm

Characteristic inner ring frequency, BPFI-222 kN da min-26.3 kN Da max-5,000 rpm ra max-4,200 rpm d--40 °C

Nlim (oil)-112 kN Nlim (grease)-13.7 kN Min operating temperature, Tmin-6,400 rpm Max operating temperature, Tmax-4,800 rpm Characteristic cage frequency, FTF--40 °C

B2-1.4 C-610 kN C1-66.6 kN d-2,600 rpm d1-1,900 rpm

f0-92 mm Nlim (grease)-1.5 mm Min operating temperature, Tmin-45 mm Max operating temperature, Tmax-100 mm Characteristic cage frequency, FTF-25 mm

C0-51.8 kN T min.--20 °C T max.-100 °C Recommended tightening torque for set screw-2.89 kg b-22 Nm